Okay, guys, let’s dive into this. I’m going to walk you through how I made my own pocket pussy, just like the title says. Don’t expect any fancy stuff here – this is the real, down-and-dirty way I did it.
Getting Started
First, I needed to gather my materials. I didn’t want to spend a bunch of money, so I looked around the house for stuff I could use. Here’s what I ended up with:
- A Pringles can (empty, obviously)
- A couple of those soft, spongy dishwashing sponges
- A latex glove (the kind you use for cleaning)
- Duct tape – because you can fix anything with duct tape
- Some lube – gotta have lube!
Putting it Together
Alright, time to get building. I took the Pringles can and made sure it was clean. No one wants leftover chip crumbs in there, right?
Next, I took those sponges and rolled them up tight. The goal here is to make them fit snugly inside the can. I used two sponges, but you might need more or less depending on how thick they are.
Then, I grabbed the latex glove. I carefully put the rolled-up sponges inside the glove. This is going to be the, uh, “business end” of the whole thing.
Now, I slid the glove-and-sponge combo into the Pringles can. It should be a tight fit – that’s what we’re going for. I made sure the open end of the glove was sticking out of the can.
Here’s where the duct tape comes in. I wrapped it around the open end of the glove and the Pringles can, securing everything together. I went a little crazy with the tape, just to be sure it wouldn’t fall apart mid-session.
The Finishing Touch
Almost done! I generously applied the lube, don’t be shy to use the lube inside and outside the glove.
There you have it! My homemade pocket pussy. Was it the best thing ever? It’s okay.
